How do I calibrate my Raymarine ST60 speed?

How do I calibrate my Raymarine ST60 speed?

speed calibration as follows:

1. With the Calibration Run Length screen displayed, press the timer.
2. Set the length of the intended calibration run, using either the timer.
3. Press timer and reset keys together to commence the speed calibra-
4. Start first outward leg of the calibration run and as you pass the start.

How do I reset my Raymarine ST60?

To perform a reset on the instrument, you need to go to the “Reset” (Factory Defaults) page, and change it to either “YES” or “1” (depending on the instrument), then change to the next page and the instrument will automatically reset.

How do I calibrate my ST60?

To do this:

1. Power-up the ST60 Wind instrument.
2. Slowly turn the vessel through two complete circles.
3. Hold down the disp and true/app keys for approximately 2 seconds to enter User calibration then use the disp key to select the wind angle screen (see the User calibration flow diagram).

How do you calibrate a Raymarine instrument?

Press the DISP button 4 times until the current wind speed is shown. once value is corrected, press and hold the DISP and TRUE/APP buttons exactly together for 2 seconds to exit calibration and store.

How do you calibrate a Raymarine wind?

How do you calibrate a fluxgate compass?

Starts here1:40HSC100 Fluxgate Compass Calibration – YouTubeYouTube

Why choose the Raymarine ST60+?

The Raymarine ST60+ offers everything from stand-alone display units to sophisticated, fully-integrated systems. Significantly enhanced displays ensure superior viewing angles for both day and night conditions. Simple, push-button controls make Raymarine ST60+ instrument displays extremely easy to use.

What kind of instrument display does Raymarine use?

Raymarine ST60+ instrument display analogue rudder display available with rudder transducer. Or used as a repeater for a Raymarine SeaTalk autopilot. Magnified 20º – 60º display for when a single degree can make all the difference.

What can I do with the Raymarine SeaTalk SmartController?

‘Soft’ power down. Monitor your Raymarine SeaTalk instruments with the wireless SmartController. Wireless operation means freedom to view vital information when on deck or out of sight of your instruments. Displays speed through water, speed over ground ( GPS required ). Sea surface temperature, trip and log data.